Indium wire is a type of fine wire made of pure indium, typically characterized by high purity and good conductivity. The Mohs hardness of metallic indium is only 1.2, much lower than the Mohs hardness of copper (2.5-3) and aluminum (2-2.9), with a melting point of 156.6°C. Its excellent ductility makes it very advantageous for…

Indium foil, a remarkable thermal interface material (TIM), offering superior heat dissipation for components like CPUs. Its efficient heat transfer enables smaller cooling systems, prolonging battery life. Moreover, its soft, ductile nature ensures better surface coverage, reducing airflow gaps and enhancing heat flow. Unlike paste or grease, this indium foil remains intact over time, maintaining…

Indium alloys offer a spectrum of possibilities, ranging from binary to ternary and multicomponent compositions. As the primary constituent, indium lends these alloys relatively low melting points, making them ideal for applications such as low-melting-point alloys or solders. Beyond mere utility, indium’s presence in some alloys serves to enhance properties like strength, ductility, wear resistance,…

Indium is a metallic element with the chemical symbol In, belonging to the group IIIA of the periodic table. It has an atomic number of 49 and a relative atomic mass of 114.8. Its melting point is 156.61°C, and its boiling point is 2060°C. It has a relative density of 7.31 g/cm³. Indium was discovered…

Indium tin foil is a type of alloy made from a combination of indium and tin. It can be produced with different ratios of indium and tin, such as In50Sn50 or In48Sn52 by weight, it also can custom the ratio based on clients, so the melting point is different accordingly. Indium tin alloy can process into…

The density of indium foil typically ranges from approximately 7.3 to 7.4 grams per cubic centimeter (g/cm³), for the typical 4N indium foil, 7.31g/cm3 is the density at the temprature of 25 degrees. However, slight variations in density may occur depending on factors such as the purity of the indium and the manufacturing process used…

Indium foil is a remarkable metal renowned for its exceptional ductility and malleability, making it a crucial component in various industries. Here’s why indium foil stands out: Exceptional Ductility and Malleability: Indium foil’s unique properties allow it to deform and seamlessly fill tiny gaps between mating components, ensuring effective sealing with minimal pressure. Consistent Performance…

Indium Foil serves as an efficient thermal interface material between heat sources such as CPUs or GPUs and heat radiators, facilitating rapid cooling. Thickness of Indium foil can vary from 0.05mm to approximately 6mm, piece sizes are available up to approximately 400mm in maximum width. Maximum lengths of about 1000mm can be achieved for thin…

Introduction: Indium, a lesser-known metal with a conductivity of 86W/mK is 4 times softer than lead. It stands out for its exceptional heat conduction capabilities. This often overlooked characteristic makes indium a valuable asset in various industries, from electronics to aerospace. Let’s explore why indium’s heat conduction prowess is garnering attention and its significance in…

The indium metal is very soft, the indium wire with a diameter of 0.5-0.8mm is very easy to break, especially the indium wire with a diameter of 0.5mm will break after a slight pull. The larger the diameter, the stronger the tensile strength of indium wire, from 1.0mm onwards, indium wire is not very easy…